NewNow Thanksgiving Discount Battery... Shop for Thanksgiving Fun Before It's Gone X

Hot : USB Charger, Power Bank, Battery Case, iPhone 6 charger case, Jump Starter

Cart (0 item)

How to Use a Battery to Battery Charger

Posted on 2nd May 2015 @ 7:00 AM

Acting as a secondary cell full of energy, a battery to battery charger can charge a vehicle's engine unassisted. Using this charger can bring a vehicle back to life and is usually relatively simple. However, some basic components can enhance their efficacy, and opting for the right parts prevents voltage drops. In addition, it is necessary to take safety precautions to prevent fires and limit the chance of charger failure.

Keep Battery to Battery Charger Installation Simple

When it comes to battery to battery chargers, all the user needs to do is connect the domestic battery and the starter battery. There is no need for direct connections to the engine alternator, which means no extra wires are necessary. When using this charger as a car battery charger, this means less time spent on the side of the road. One wire from the auxiliary battery connects to the charger.

Use the Correct Battery to Battery Cable

The use of a battery to battery charger is simple, but using the wrong wire has potentially dangerous consequences. When using a 12V battery to battery charger, 16mm cables with 100 amp power are necessary. It is also necessary to fit 60-amp fuses to the ends. One should rest next to the starter battery, and the other one goes next to the battery being charged.

Mount the Battery to Battery Charger Close

Regardless of the quality of a battery to battery charger, placing it too far away from the battery being charged leads to voltage drops. When using a motorhome battery charger or a caravan battery charger, it may require an external prop to elevate the device in question. In addition, using a voltage regulator on the starter side is a smart choice. Not only does this make it easier to use longer cables, it also results in less voltage drop, regardless of the distance. Users should always use high-quality battery cables that are no longer than 10 metres.

Take the Right Safety Precautions When Using a Leisure Charger

When using a leisure battery charger or any form of battery to battery device, safety precautions are important. As a source of electricity, these batteries conduct electricity in water. It is best to use them in dry conditions to reduce the risk of electrocution and fires. In addition, it is important to allow for proper ventilation. When a battery to battery charger does not have enough room to dissipate heat energy, it can overheat and break down. As a result, your efforts are pointless. When set up in the right conditions, it is possible to leave these chargers alone so they can do their job unassisted.

Portable Car Jump Starter